← Cisco CCNA 200-301 · CCNA Intermediate

CCNA 200-301 Intermediate Quiz

Learning Objectives

Apply CCNA concepts: VLANs, STP, OSPF, ACLs, NAT, and wireless networking principles.

Cisco CCNA 200-301 certification badge
Time left --:--:--
Question 1 / 60 · 60 unanswered
Question 1 of 60
On the CCNA 200-301 exam, a host is assigned 192.168.10.65/26. What is the network address and broadcast address of this subnet?
1 / 60
Question 2 of 60
On the CCNA 200-301 exam, which OSPF router type connects two or more OSPF areas and is responsible for summarizing and forwarding routing information between areas?
2 / 60
Question 3 of 60
On the CCNA 200-301 exam, which subnetting calculation determines how many usable hosts a /29 subnet supports?
3 / 60
Question 4 of 60
Which IPv4 subnetting technique allows a single classful network block to be divided into subnets of DIFFERENT sizes — allocating a /30 for a WAN point-to-point link and a /22 for a large LAN — to minimize IP address waste?
4 / 60
Question 5 of 60
According to the CCNA 200-301 exam, what does the 'show interfaces' command output 'input errors' counter indicate?
5 / 60
Question 6 of 60
According to the CCNA 200-301 exam, which EtherChannel negotiation protocol is an open IEEE standard (non-Cisco proprietary)?
6 / 60
Question 7 of 60
According to the CCNA 200-301 exam, which OSPF packet type is sent by all routers on a broadcast segment to discover neighbors using multicast 224.0.0.5?
7 / 60
Question 8 of 60
According to the CCNA 200-301 exam, which OSPF feature reduces the size of LSA flooding by summarizing multiple routes at an ABR?
8 / 60
Question 9 of 60
The CCNA 200-301 exam covers which OSPF state represents the stage where two routers have exchanged full LSA databases and are synchronized?
9 / 60
Question 10 of 60
The CCNA 200-301 exam covers which STP enhancement immediately places a port into Forwarding state when connected to an end device — skipping Listening and Learning?
10 / 60
Question 11 of 60
The CCNA 200-301 exam covers which command correctly configures OSPF process 1 and announces network 10.0.0.0/8 on a Cisco router?
11 / 60
Question 12 of 60
The CCNA 200-301 exam covers which Cisco feature automatically adjusts STP port costs based on interface bandwidth to elect the best root port?
12 / 60
Question 13 of 60
On the CCNA 200-301 exam, which STP port state forwards traffic and participates in topology change detection?
13 / 60
Question 14 of 60
On the CCNA 200-301 exam, which command displays the VLANs that are allowed and active on a specific trunk port?
14 / 60
Question 15 of 60
On the CCNA 200-301 exam, which Cisco IOS command configures an IPv6 address on an interface using EUI-64 to automatically generate the interface identifier?
15 / 60
Question 16 of 60
On the CCNA 200-301 exam, which Cisco IOS command enables EIGRP autonomous system 100 and advertises all networks on the router?
16 / 60
Question 17 of 60
According to the CCNA 200-301 exam, which command configures a Cisco router interface with an IP address of 10.0.0.1/30?
17 / 60
Question 18 of 60
According to the CCNA 200-301 exam, which OSPF network type uses a Designated Router (DR) and Backup Designated Router (BDR) election?
18 / 60
Question 19 of 60
According to the CCNA 200-301 exam, which STP enhancement prevents a non-edge port from transitioning to the Forwarding state if it stops receiving BPDUs — guarding against unidirectional link failures?
19 / 60
Question 20 of 60
According to the CCNA 200-301 exam, which mechanism prevents routing loops in distance-vector protocols by not advertising routes back out the interface they were learned on?
20 / 60
Question 21 of 60
The CCNA 200-301 exam covers which type of OSPF LSA is generated by an ASBR and carries external routing information into an OSPF area?
21 / 60
Question 22 of 60
The CCNA 200-301 exam covers which Cisco feature provides Layer 3 routing between VLANs using subinterfaces on a single router physical interface?
22 / 60
Question 23 of 60
The CCNA 200-301 exam covers which QoS queuing method prioritizes voice and video traffic by serving high-priority queues first before serving lower-priority queues?
23 / 60
Question 24 of 60
The CCNA 200-301 exam covers which Cisco switch command enables 802.1X authentication on a specific access port?
24 / 60
Question 25 of 60
On the CCNA 200-301 exam, which Cisco IOS feature translates private RFC 1918 addresses to a single public IP using unique port numbers?
25 / 60
Question 26 of 60
On the CCNA 200-301 exam, which wireless security feature authenticates users against a RADIUS server before allowing network access?
26 / 60
Question 27 of 60
On the CCNA 200-301 exam, which command configures a VTY line password on a Cisco device for Telnet access?
27 / 60
Question 28 of 60
On the CCNA 200-301 exam, which network management protocol sends unsolicited alerts from a managed device to a management station when a significant event occurs?
28 / 60
Question 29 of 60
According to the CCNA 200-301 exam, which Cisco switch feature prevents rogue DHCP servers from responding to client requests on untrusted ports?
29 / 60
Question 30 of 60
According to the CCNA 200-301 exam, which command configures a Cisco switch to use SSH for remote access on the vty lines?
30 / 60
Question 31 of 60
According to the CCNA 200-301 exam, which EIGRP metric component is used as the primary discriminator when bandwidth is equal between two paths?
31 / 60
Question 32 of 60
According to the CCNA 200-301 exam, which type of firewall maintains a state table to track TCP connection state and allows return traffic automatically?
32 / 60
Question 33 of 60
Which WAN encapsulation protocol for Cisco serial interfaces supports multiple Network Layer protocols simultaneously AND provides optional authentication via PAP or CHAP, making it the preferred choice for multi-vendor serial WAN connections?
33 / 60
Question 34 of 60
The CCNA 200-301 exam covers which QoS marking method uses a 6-bit field in the IP header to classify and prioritize traffic?
34 / 60
Question 35 of 60
The CCNA 200-301 exam covers which Cisco device management feature provides centralized visibility and configuration management for campus networks via a web-based dashboard?
35 / 60
Question 36 of 60
The CCNA 200-301 exam covers which configuration verifies that a Cisco router has OSPF running and shows the router ID and OSPF process information?
36 / 60
Question 37 of 60
On the CCNA 200-301 exam, which command verifies that OSPF neighbors have formed an adjacency on a Cisco router?
37 / 60
Question 38 of 60
On the CCNA 200-301 exam, which command verifies that IP SLA operations are running and shows statistics on a Cisco router?
38 / 60
Question 39 of 60
On the CCNA 200-301 exam, which BGP attribute is preferred first when selecting the best path among multiple routes to the same destination?
39 / 60
Question 40 of 60
On the CCNA 200-301 exam, which command configures the native VLAN on a Cisco trunk port to VLAN 99?
40 / 60
Question 41 of 60
According to the CCNA 200-301 exam, which wireless standard introduced OFDMA and BSS Coloring to improve performance in dense environments?
41 / 60
Question 42 of 60
According to the CCNA 200-301 exam, which spanning tree variant converges faster than 802.1D by using rapid transitions and proposal/agreement mechanisms?
42 / 60
Question 43 of 60
According to the CCNA 200-301 exam, which network automation approach uses pre-built playbooks written in YAML to configure and manage network devices in an agentless manner?
43 / 60
Question 44 of 60
According to the CCNA 200-301 exam, which cloud service model delivers complete applications over the internet managed entirely by the service provider?
44 / 60
Question 45 of 60
The CCNA 200-301 exam covers which syslog severity level indicates normal but significant conditions that require monitoring?
45 / 60
Question 46 of 60
The CCNA 200-301 exam covers which type of ACL can filter traffic based on source IP, destination IP, protocol, and port numbers?
46 / 60
Question 47 of 60
The CCNA 200-301 exam covers which REST API method is used to retrieve data from a network controller without modifying it?
47 / 60
Question 48 of 60
The CCNA 200-301 exam identifies which Cisco SD-Access component provides the underlay network's automated IP connectivity using IS-IS as the routing protocol?
48 / 60
Question 49 of 60
On the CCNA 200-301 exam, which IPv6 transition mechanism encapsulates IPv6 packets within IPv4 packets for transport across an IPv4 network?
49 / 60
Question 50 of 60
On the CCNA 200-301 exam, which IPv6 address type is used by routing protocols like OSPFv3 and is only valid within a single link?
50 / 60
Question 51 of 60
On the CCNA 200-301 exam, which data serialization format is most commonly used in modern REST APIs and network automation tools?
51 / 60
Question 52 of 60
On the CCNA 200-301 exam, which network programmability concept describes the ability to manage network devices through APIs rather than manual CLI configuration?
52 / 60
Question 53 of 60
According to the CCNA 200-301 exam, which HSRP state indicates that the router is actively forwarding packets for the virtual IP?
53 / 60
Question 54 of 60
According to the CCNA 200-301 exam, which configuration step is required on a Cisco switch to allow a VLAN to be routed via a Layer 3 SVI?
54 / 60
Question 55 of 60
According to the CCNA 200-301 exam, which SNMP version provides both authentication and encryption for secure device monitoring?
55 / 60
Question 56 of 60
According to the CCNA 200-301 exam, which wireless roaming technique allows a client to pre-authenticate to a new AP before disconnecting from the current AP — minimizing roaming latency?
56 / 60
Question 57 of 60
The CCNA 200-301 exam identifies which dynamic ARP inspection (DAI) feature validates ARP packets against the DHCP snooping binding table to prevent ARP spoofing?
57 / 60
Question 58 of 60
The CCNA 200-301 exam identifies which Cisco wireless architecture uses a split-MAC approach where the WLC handles control plane functions and lightweight APs handle real-time 802.11 functions?
58 / 60
Question 59 of 60
The CCNA 200-301 exam identifies which SD-WAN component serves as the central policy and orchestration platform managing overlay connectivity?
59 / 60
Question 60 of 60
The CCNA 200-301 exam covers which telemetry model allows network devices to continuously push operational data to a collector without requiring polling?
60 / 60