← Cisco CCNA 200-301 · CCNA Beginner

CCNA 200-301 Beginner Quiz

Learning Objectives

Understand networking fundamentals: OSI model, IP addressing, subnetting, and basic switching.

Cisco CCNA 200-301 certification badge
Time left --:--:--
Question 1 / 60 · 60 unanswered
Question 1 of 60
On the CCNA 200-301 exam, which device operates at OSI Layer 3 and makes forwarding decisions based on IP addresses?
1 / 60
Question 2 of 60
On the CCNA 200-301 exam, which switching technology logically divides a physical switch into multiple isolated broadcast domains?
2 / 60
Question 3 of 60
On the CCNA 200-301 exam, which routing table code indicates a directly connected network in the 'show ip route' output?
3 / 60
Question 4 of 60
On the CCNA 200-301 exam, which type of Ethernet cable connects a PC to a switch?
4 / 60
Question 5 of 60
According to the CCNA 200-301 exam, which address is used to identify a device's network interface at OSI Layer 2?
5 / 60
Question 6 of 60
According to the CCNA 200-301 exam, which protocol prevents loops in switched networks by placing redundant links in a blocking state?
6 / 60
Question 7 of 60
According to the CCNA 200-301 exam, which subnet mask in CIDR notation represents 255.255.255.0?
7 / 60
Question 8 of 60
According to the CCNA 200-301 exam, which transport layer protocol is connectionless and best suited for latency-sensitive applications like VoIP and video streaming?
8 / 60
Question 9 of 60
The CCNA 200-301 exam identifies which protocol dynamically assigns IP addresses to hosts on a network?
9 / 60
Question 10 of 60
The CCNA 200-301 exam covers which type of switch port carries traffic for multiple VLANs between switches?
10 / 60
Question 11 of 60
The CCNA 200-301 exam identifies which Cisco switch feature allows multiple physical links to act as a single logical high-bandwidth link?
11 / 60
Question 12 of 60
The CCNA 200-301 exam identifies which type of routing protocol uses link-state information to build a complete map of the network topology?
12 / 60
Question 13 of 60
On the CCNA 200-301 exam, which protocol resolves an IP address to its corresponding MAC address on a local network?
13 / 60
Question 14 of 60
On the CCNA 200-301 exam, which command displays the MAC address table on a Cisco switch?
14 / 60
Question 15 of 60
On the CCNA 200-301 exam, which type of routing requires a network administrator to manually configure routes in the routing table?
15 / 60
Question 16 of 60
On the CCNA 200-301 exam, which command configures a static default route on a Cisco router to forward all unknown traffic to 192.168.1.1?
16 / 60
Question 17 of 60
According to the CCNA 200-301 exam, which command verifies the IP configuration on a Cisco router interface?
17 / 60
Question 18 of 60
According to the CCNA 200-301 exam, which routing protocol uses bandwidth and delay as its default composite metric?
18 / 60
Question 19 of 60
According to the CCNA 200-301 exam, which protocol is used by network management systems to monitor and manage network devices?
19 / 60
Question 20 of 60
Which Cisco switch security feature prevents a rogue DHCP server connected to an untrusted port from assigning incorrect IP addresses and default gateways to clients on the network?
20 / 60
Question 21 of 60
The CCNA 200-301 exam covers which IP address class has a default subnet mask of 255.255.255.0?
21 / 60
Question 22 of 60
The CCNA 200-301 exam identifies which IPv4 address is used as the loopback address for testing the local TCP/IP stack?
22 / 60
Question 23 of 60
The CCNA 200-301 exam covers which command is used in Cisco IOS to enter privileged EXEC mode (enable mode)?
23 / 60
Question 24 of 60
The CCNA 200-301 exam covers which wireless deployment model centralizes WLAN control and configuration management across all access points?
24 / 60
Question 25 of 60
On the CCNA 200-301 exam, which OSI layer is responsible for end-to-end communication and error recovery — associated with TCP and UDP?
25 / 60
Question 26 of 60
On the CCNA 200-301 exam, which protocol synchronizes time across network devices to ensure log timestamps are accurate?
26 / 60
Question 27 of 60
On the CCNA 200-301 exam, which type of memory on a Cisco router stores the running configuration and is volatile (lost on reboot)?
27 / 60
Question 28 of 60
On the CCNA 200-301 exam, which NAT type allows many private IP addresses to share a single public IP address using port numbers to differentiate sessions?
28 / 60
Question 29 of 60
According to the CCNA 200-301 exam, which type of Ethernet cable is used to connect two devices of the SAME type (e.g., switch to switch)?
29 / 60
Question 30 of 60
According to the CCNA 200-301 exam, which type of NAT maps a single private IP address to a single public IP address on a one-to-one basis?
30 / 60
Question 31 of 60
According to the CCNA 200-301 exam, which port number is used by SSH for secure remote CLI access to Cisco devices?
31 / 60
Question 32 of 60
According to the CCNA 200-301 exam, which Cisco IOS command enables SSH version 2 for encrypted remote access?
32 / 60
Question 33 of 60
The CCNA 200-301 exam identifies which protocol is used to test network connectivity by sending echo requests and receiving echo replies?
33 / 60
Question 34 of 60
The CCNA 200-301 exam covers which command displays the IP routing table on a Cisco router?
34 / 60
Question 35 of 60
The CCNA 200-301 exam covers which type of IPv4 address is used to send traffic to all hosts on a local network segment?
35 / 60
Question 36 of 60
The CCNA 200-301 exam identifies which wireless frequency band provides better range but is more susceptible to interference from microwaves and Bluetooth?
36 / 60
Question 37 of 60
On the CCNA 200-301 exam, which Cisco command saves the running configuration to NVRAM so it persists after a reboot?
37 / 60
Question 38 of 60
On the CCNA 200-301 exam, which transport layer protocol provides reliable, connection-oriented communication?
38 / 60
Question 39 of 60
On the CCNA 200-301 exam, which Cisco IOS mode is used to configure interfaces, routing protocols, and access control lists?
39 / 60
Question 40 of 60
On the CCNA 200-301 exam, which Cisco IOS command displays CDP neighbor information including device type and IP address?
40 / 60
Question 41 of 60
According to the CCNA 200-301 exam, which private IP address range is available for Class A internal networks?
41 / 60
Question 42 of 60
According to the CCNA 200-301 exam, which VLAN is the default management VLAN on Cisco switches to which all ports initially belong?
42 / 60
Question 43 of 60
How many usable host IP addresses are available in a subnet with a /27 prefix length?
43 / 60
Question 44 of 60
According to the CCNA 200-301 exam, which extended ACL match condition blocks HTTP traffic from host 10.1.1.1 to any destination?
44 / 60
Question 45 of 60
The CCNA 200-301 exam covers which type of IPv6 address is automatically assigned to all IPv6 interfaces and uses the FE80::/10 prefix?
45 / 60
Question 46 of 60
The CCNA 200-301 exam identifies which type of IPv6 address is equivalent to an IPv4 broadcast address and is used to reach all nodes on a link?
46 / 60
Question 47 of 60
The CCNA 200-301 exam identifies which Cisco discovery protocol allows Cisco devices to share information about neighboring directly connected Cisco devices?
47 / 60
Question 48 of 60
The CCNA 200-301 exam covers which dynamic routing protocol is considered the most scalable and is used for routing between autonomous systems on the internet?
48 / 60
Question 49 of 60
On the CCNA 200-301 exam, which wireless standard operates on both 2.4 GHz and 5 GHz bands and provides theoretical speeds up to 600 Mbps?
49 / 60
Question 50 of 60
On the CCNA 200-301 exam, which wireless security protocol replaced WEP and provided TKIP encryption as an interim improvement?
50 / 60
Question 51 of 60
On the CCNA 200-301 exam, which type of cable connects a router's console port to a PC's serial port for out-of-band management?
51 / 60
Question 52 of 60
On the CCNA 200-301 exam, which command displays the Spanning Tree Protocol status for all VLANs on a Cisco switch?
52 / 60
Question 53 of 60
According to the CCNA 200-301 exam, which TCP/IP protocol translates domain names to IP addresses?
53 / 60
Question 54 of 60
According to the CCNA 200-301 exam, which Cisco feature provides first-hop redundancy by allowing two routers to share a virtual IP address for default gateway failover?
54 / 60
Question 55 of 60
According to the CCNA 200-301 exam, which protocol provides a standardized method for discovering neighboring devices across multivendor networks?
55 / 60
Question 56 of 60
According to the CCNA 200-301 exam, which type of memory on a Cisco device stores the IOS image?
56 / 60
Question 57 of 60
The CCNA 200-301 exam identifies which security feature limits the number of MAC addresses allowed on a switch port?
57 / 60
Question 58 of 60
The CCNA 200-301 exam covers which access control list type filters traffic based on source IP address only and is applied closest to the destination?
58 / 60
Question 59 of 60
The CCNA 200-301 exam covers which IP address range is reserved for multicast groups?
59 / 60
Question 60 of 60
The CCNA 200-301 exam identifies which protocol is used to securely transfer files and configurations to/from Cisco devices over an encrypted SSH connection?
60 / 60